LINAIRE Flex Top Bend Linear Light

LINAIRE^® Flex Linear Light

LINAIRE^® Flex Top Bend

Top-bending flexible fixture with a medium form factor. Light curved details or create long, straight runs of dotless linear light.

Standard color temperatures (CCTs) from 2400K to 4000K, and light output up to 150+ lumens per foot.

Spec Sheet Installation Guide IES Files LM-79 Report Field Assembly Video

Top-bending fixture with no visible dots

2.6 watts per foot for lumen outputs up to 115 lm/ft

Maximum run length up to 32. feet per piece

Factory assembly (IP67)

Field cuttable, free-cut termination (IP65)

5 year warranty

	Voltage	Model	Series	CCT	Run Length	Wire Entry	Mounting	Driver
DI	24V
		LIN	130	2400	016 (16 ft. spool)	Straight	MTCH (Mounting Channel)	ELV (Electronic)
		LIN3	250	2700	032 (32 ft. spool)	Side	SPINE (Spine Channel)	0-10V (0-10 Volt)
				3000		Bottom	MTCL (U-Clips)	TRIAC
				3500			None	MLV (Magnetic)
				4000				SWX (SwitchEx)

Learn about our product codes and about voltage drop

Mounting Options

Mount LINAIRE Flex Top Bend with one of four mounting methods for clean, professional, permanent installation:

Straight mounting channel, for straight runs of light that are held firmly in place. This channel can be cut to length in the field
Spine mounting channel, for keeping the light in the position you need it. This channel bends side to side, and can be cut to length in the field
Mounting clips
3M adhesive

Assemble, trim, and cap LINAIRE Flex Top Bend in the field:

Field connectors: Straight, Side, or Bottom wire exits
End caps, for keeping the fixture waterproof

Straight mounting channel, for straight runs
DI-LIN-TE-MTCH-39 [39" piece, aluminum]

Spine mounting channel, for holding the light in place in bending configurations
DI-LIN-TE-SPINE-39 [39" piece, white]

Mounting clip
DI-LIN-TE-MTCL-2 [2-pack, white]

Factory Assembly
Wire Entry Options

Select from three factory-built wire entry options, all with an IP67 water resistance rating:

Straight wire entry is ideal for standard applications
Side wire entry enables seamless end-to-end contact between multiple runs, minimizing any visible break in light and avoiding spce between fixtures due to wires
Bottom wire entry is useful when directing wires into conduit or otherwise concealing every visible element except the light itself

Straight wire entry

Side wire entry

Bottom wire entry

Field Assembly
Wire Entry Options & Components

LINAIRE Flex Top Bend runs can be field-assembled for an IP65 water resistance rating using Field Connectors, Dead End Caps, and adhesive. "Free cut" means the light can be cut at nearly any interval, not only at designated cut points, so you can build lengths that fit perfectly into your space.

Spools come with an IP67 rating; when trimmed and re-capped in the field the rating becomes IP65.